Newtec MDM2210 IP Satellite Modem
Newtec MDM2210 IP Satellite Modem
$0.00
KEY FEATURES
- Small size, table top or wall mounted
- DVB-S2 ACM Forward
- 4CPM MF-TDMA Adaptive Return Link
- Embedded TCP acceleration and encryption
- Multi-level Quality of Service
- Versatile IP routing and addressing
- Low jitter for real time applications
- DNS Cache/Relay and HTTP pre-fetching
- Support of IPv4 and IPv6
- MicroSD card and USB interface (future use)
- Over-the-air software upgradeability
- Over-the-air monitoring and diagnostics tools
Trump cards are its easy installation and efficient modulation techniques enabling network operators to offer IP broadband services in a cost effective way.
Main advantages
- Low initial investment per user, thanks to a very low terminal cost and unique Point & Play easy – installation capability
- Easy to use web GUI for installation, diagnostics and troubleshooting
- Adaptive Return Link based on different 4CPM modulations/coding and multiple channel bandwidths.
- High service satisfaction ensured through true broadband experience
- Optimal availability and efficiency of DVB-S2 transmission thanks to Newtec’s technologies FlexACM® and ThiMM
- Efficiency improvement of 10 to 15% with Newtec’s Clean Channel Technology®
| • Max RX rate UDP up to 20 Mbps total (unicast or multicast) |
| • Max TX rate TCP up to 3.5 Mbps |
| • Max TX rate UDP up to 3.5 Mbps |
| Modem Interfaces |
| RF INPUT/OUTPUT: |
| • Connector: Two F |
| • Impedance: 75 Ohm |
| • RF in Frequency: 950 – 2100MHz (L-band) |
| • Rx Level: -65 to -25dBm |
| • RF out Frequency: 2750 – 3000MHz |
| • Tx Level: 0 dBm |
| LOCAL AREA CONNECTION 1 x 10/100 TX (RJ-45) |
| USB USB 2.0 (future use) |
| MASS STORAGE MicroSD card (future use) |
| Mechanical & Environment |
| • Housing 170x150x32mm |
| • Weight 450 g |
| • Operating temperature 0 to 40°C |
| • Humidity 5% – 95% non-condensing |
| Power supply |
| • DC Power supply 18V or 24V (depending on iLNB) |
| • Mains adaptor input mains AC, 50Hz\210-260V and 60Hz\100-130V |
| • Power consumption <30 Watt (0.8W Ku iLNB), <60 Watt (2W iLNB) |
| IP features |
| • Protocols: UDP, IPv4 & IPv6, ICMP, IGMPv2, TCP, ARP, DHCP, DNS, DiffServ Marking |
| Management Interfaces |
| • Web GUI |
| • Over-the-air software & configuration updates |
| • Over-the-air monitoring, self-test and diagnostics |
| Software release |
| • Specifications valid for Sat3Play© software release 2.2 |
| Standards |
| • EN 302307 DVB-S2 |
| • EN 301428 Ku-band VSAT spectrum usage |
| • EN 301459 Ka-band VSAT spectrum usage |
| • IEEE 802.3 10T Ethernet |
| • IEEE 802.3u 100TX Ethernet |
| Satellite Link Interface |
| FORWARD CARRIER (RX) |
|
|
| • Coding 1/4, 1/3, 2/5, 1/2,3/5, 2/3,3/4,4/5, 5/6, 8/9, 9/10 |
| • Roll-off 5, 10, 15, 20, 25 and 35 % |
|
| RETURN CARRIER (TX) |
|
|
| Channel bandwidth 128kHz to 4MHz |
