Meanwell 200W 48VDC Waterproof Power Supply
Meanwell 200W 48VDC Waterproof Power Supply
Original price was: $130.00.$95.00Current price is: $95.00.
Meamnwell LPV-200-48 200W 48VDC Power Supply
LED constant voltage waterproof switching power supply
Features:
– Constant voltage style power supply
– 180~264VAC AC input
– Small volume, low weight, high efficiency
– Protections: short circuit/over load/over voltage/over temp
– Cooling by free air convection
– Fully encapsulated with IP67 level
– 100% full load burn-in test
– 1 year warranty
| Model | LPV-200-48 | |
| output | DC voltage | 48V |
| Voltage tolerance | ±1% | |
| Rated current | 4.2A | |
| Current range | 0~4.2A | |
| Rated power | 201.6W | |
| Ripple&noise | 240mvp-p | |
| input | Voltage range | 180~264VAC, 255~373VDC |
| Frequency | 47~63HZ | |
| AC current | 2.5A/230VAC | |
| Efficiency | 85% | |
| Inrush current | Cold start current 40A/230VAC | |
| Leakage current | <2.5mA/240VAC | |
| protection | Over load | Rated output power 105%~135%start over load protection |
| protection type: hiccup mode, auto-recovery after fault condition is removed | ||
| Over voltage | 54.8~56.6V | |
| protection type: hiccup mode, auto-recovery after fault condition is removed | ||
| Over temperature | Shell temp>85°C, start over temperature protection | |
| protection mode: cutoff output, auto-recovery after temperature become normal | ||
| environment | Working temp, humidity | -10°C~+60, 20%~90%RH |
| Storage temp.humidity | -20°C~+85, 10%~95%RH non condensing | |
| Withstand vibration | 10~500HZ, 2G 10min/1cycle, period for 60minutes, each axes | |
| safety | Withstand voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| Isolated resistance | I/P-O/P, I/P-FG, O/P-FG: 100M ohms/500VDC | |
| fit standard | Safety standard | Fit UL1012, IP67 protect level |
| eMC standard | Fit EN55022, CLASS A | |
| others | Dimension | 240*69*43mm (L*W*H) |
| Weight/packing | 1.26kg/20pcs/26kg/0.033 m3/1.15CUFT | |
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. |
|
